![WNQ F1-4000A Скачать руководство пользователя страница 24](http://html1.mh-extra.com/html/wnq/f1-4000a/f1-4000a_manual_991238024.webp)
24
Display “OFF”, glint
显示
OFF,
并闪烁
1.
电子表内部线路异常
The signal of control is break off
1.Check and repair the electronic display.
检修电子表
It’s normal without
loading, but pause
when you run.
空载时
正常,人跑步时有停
顿现象
1.Tightness of the belt not be adjusted
well
跑步带或多槽皮带松紧度未调好
1.Adjust the belt in accordance with the co
rrect technique
按正确方法调整跑带或多槽皮带
2.Cleaning the dirty between the belt and t
he running board, then do the lubricate
清理跑带与跑板间异物,并上油
Running belt incline
to one side
跑带偏向
一边
1.Running belt not balanced well
跑带平
衡度未调好
1.Consult to the running belt adjusting
method
参考跑步带调试方法细心调节平衡
度。
Show abnormally or
un-show,
buttons
have no effect.
显 示
不正常,按键失效
1.Interrupted by the external
electromagnetism, make Display work
disorderly.
外间电磁干扰强烈
2. Electronic display abnormal
电子表异
常
1.Cut off the electricity, restart after the
disturbance disappear
关断电源后待干扰
消失后重新开机
2.Check and repair the electronic display
检修电子表
Display normal,
running feebly and
noising
显示正常,跑
步时无力
且有
嗡嗡
声
1.Low voltage.
市电过低
2.Electric machinery abnormal
电机有异常
1. Check the voltage whether abnormal or
not
检查电压是否正常
2. Check and repair the electric machinery
检修或更换电机
10. Explosion drawing
爆炸图