WNC M14Q2, Руководство пользователя

Страница: 10 / 33

10 / 33
□
Normal
□
Intern al Use

Confidential
□ Re
stricted Confidential
User Manual
2.1.2. Pin Assignments
Table 1. Pin interface family
Interface Family Signal Description I/O
RF Interfaces
ANT1_DRX Diversity antenna I
ANT_GNSS Reserved for GNSS receiver I
ANT0_TRX Main Antenna I/O
User Identity Module
VREG_L6_UIM1 Power source for UIM O
UIM1_DATA Data in/out I/O
UIM1_CLK Clock signal O
UIM1_RESET Reset signal O
UIM1_DETECT UIM Detect signal I/O
Data
Interfaces
USB 2.0
USB_HS_DP USB Data Positive I/O
USB Detect USB Detect I
USB_HS_DM USB Data Negative I/O
HSIC
HSIC USB_STROBE HSIC USB Strobe I/O
HSIC USB_DATA HSIC USB Data I/O
SGMII
SGMII_RX_P SGMII receive - plus I
SGMII_RX_M SGMII receive - minus I
SGMII_TX_P SGMII transmit - plus O
SGMII_TX_M SGMII transmit - minus O
SGMII_MDIO SGMII Management data I/O
SGMII_MDC SGMII Management data clock I/O
UART1
UART1_CTS_N Clear To Send for UART 1 I
UART1_RFR_N UART ready for frame O
UART1_RX Receive for UART 1 I
UART1_TX Transmit for UART 1 O
UART2
MDM_DBG_UART_RX Receive for UART 2 I
MDM_DBG_UART_TX Transmit for UART 2 O
I2C/2nd_ SPI
I2C_SDA Data in/out I/O
2nd_SPI_EN_1 2nd_SPI chip select O
I2C_SCL Clock signal O
2nd_SPI_CLK 2nd_SPI serial clock O
NC NC
SPI_MOSI 2nd_SPI master out slave in O
NC NC