WMH Tool Group JET JWBS-18X, Инструкция по эксплуатации и каталог запасных частей

Страница: 9 / 36

9
Unpacking
Contents of Shipping Container
1 Bandsaw
1 Table
1
Fence and Rail Assembly
1 Resaw Guide and Knob
1 Miter Gauge
1 Owner’s Manual
1 Warranty Card
1 Accessory Package Contains:
Hardware Bag
2 Knobs
1 Hex Wrench
1 Handle
1 10/12mm Wrench
Fence Hardware Bag
4 Hex Cap Screws
4 Flat Washers
4 Lock Washers
Rail Hardware Bag
9 Hex Cap Screws
9 Flat Washers
9 Lock Washers
1. Remove the crate and packing material from
the bandsaw except for the transport skid on
the bottom.
2. Move the saw to its permanent working
location. The site should be dry, well lit, and
have enough room to handle long stock and
the service and/or adjustment of the
machine from any side.
3. Move the bandsaw off the skid.
4. Clean all rust protected surfaces with a mild
solvent or diesel fuel and a soft cloth. Do
not use lacquer thinner, paint thinner, or
gasoline. These will damage painted
surfaces.
Tools Included for Assembly
1. 10/12mm Open End Wrench
1. Hex
Wrench
Tools Required for Assembly & Adjustments
2. 14mm Open End Wrench
1. Cross Point Screw Driver
1. Combination
Square