83
6.1.2
PROGRAMMING START-UP AND SHUTDOWN
To access, press
“ENTER“
key.
Calibration Prog4
/ < / > / ENTER
To search, press key.
Set Metering Volumes
/ < / > / ENTER / EXIT
To search again, press key.
Set Coffee Powder
/ < / > / ENTER / EXIT
To access the programming sequence, press
“ENTER“.
Set Hour Date
/ < / > / ENTER / EXIT
Timer selections: to move within the timer sequence,
press
.
Set Times & Dates
/ < / > / ENTER / EXIT
To access timer selection menu, press
“ENTER“
.
Set ON / OFF Timer
/ < / > / ENTER / EXIT
Programming day / date: to change flushing selection,
press
keys.
Sunday I ON / OFF*
Sel: 0L 00:00 00:00
The machine can be programmed with a maximum of 3 start-
up and shutdown times per day. Select additional switch
Tuesday I ON / OFF*
Sel: 0L 00:00 00:00
times by pressing
keys.
For selection of brew quantities see
6.1.4
SELECTION OF BREW QUANTITIES
Tuesday I ON / OFF*
Sel: 0L 00:00 00:00
To program the
hour
(
00
:00) for machine start-up, press
keys.
Tuesday I ON / OFF*
Sel: 1-2L 00:00 00:00
To program the exact minute (00.
00
) for start-up, press
keys a second time.
Tuesday I ON / OFF*
Sel: 1-2L 07:00 00:00
To program the shutdown time, use the same procedure. The
latest shutdown time in a day is 23:59 (11:59pm). Please note
Tuesday I ON / OFF*
Sel: 1-2L 07:50 00:00
that the machine shuts down automatically only if a
shutdown time
has been selected; the machine will remain switched on if the
display reads 00:00 hours.
Tuesday I ON / OFF*
Sel: 1-2L 07:50 10:00
