WMF 5000S+ Скачать руководство пользователя страница 13

Страница: 13 / 120

User Manual WMF 5000 S +

Safety

Installation location

• The device can be used as a self-service device if it is supervised

by trained personnel.
The machine must be set up so as to allow good visual access.

• The device must be placed and levelled on a horizontal, sturdy,

water-resistant, and heatproof base.

• The device must not be cleaned using a water jet. The device

must be installed where it is protected against water spray.

• The device must not be located on a surface that is sprayed or

cleaned with a water hose, steam jet, steam cleaner, or similar
devices.

Water supply

• 3/8 inch hose connector with water mains tap, and dirt filter

with 0.003 in (0.08 mm) mesh size, on-site. At least 29 psi
(0.2 MPa) (2 bar) supply pressure at 0.53 gal/min (2 l/min).
Maximum 87 psi (0.6 MPa) (6 bar).
Maximum inlet temperature 95 °F (35 °C).

• The set of hoses provided with the new coffee machine

and/or the new water filter must be used. Do not use the old
set of hoses.

Ambient temperature

• Ambient temperature 41 °F to a maximum of 95 °F

(+5 °C to a m35 °C)

Содержание 5000S+

























































































































Результаты поиска

Содержание 5000S+

Отзывы:

Бренды по названию

Популярные бренды

WMF 5000S+, Руководство пользователя

Результаты поиска

Содержание 5000S+

Отзывы:

Бренды по названию

Популярные бренды