WMF 450 Скачать руководство пользователя страница 63

Страница: 63 / 78

Display messages and malfunctions

The brewing unit is not inserted.

Switch off the WMF 500 with the On/Off switch.

Insert the brewing unit.

Check if the brewing unit is inserted correctly.

The brewing unit can only be inserted with difﬁ culty or it cannot be
inserted at all:

Remove the brewer.

Apply a thin layer of grease from the accessories to the sealing
rings (see Chapter 4.4.2).

Fill the water tank.

Bleed the automatic coffee machine by dispensing hot water
until a constant stream of water comes out.

Loud pumping noises?

Check whether the water tank is completely pushed in.

Bleed the automatic coffee machine by dispensing hot water
until a constant stream of water comes out.

Is the water ﬁ lter or sieve clogged?

Change the water ﬁ lter (see Chapter 4.2.5).

Clean the sieve.

Is the check valve spout of the water tank dirty?

Clean the water spout of the water tank from behind with a small
brush from the accessories.

Replace brewer

Flow fault

Содержание 450















































































Результаты поиска

Содержание 450

Отзывы:

Бренды по названию

Популярные бренды

WMF 450, Руководство пользователя

Результаты поиска

Содержание 450

Отзывы:

Бренды по названию

Популярные бренды