WMF 150 F, Руководство пользователя

Страница: 54 / 72

54
User Manual WMF 150 F
Make sure that you position the thermos jug correctly
under the basket fi lter before the descaling process
starts.
Descaling stage
► Slowly pour (approx. 250ml) descaler solution [9] in the
funnel [10] . Stop fi lling when you hear a beep.
► Press the start/stop button [11] . The green indicator light
[12] illuminates. The solution runs through the heating
system and discharges into the jug.
► The red indicator light [13] blinks (90 sec.) when the solu-
tion reacts with the deposit in the heating system.
► When you hear 3 beeps, repeat the previous descaling stage
again. After the second descaler solution ran through,
continue with the instructions for the rinsing stage.
> If the amount of descaler solution is not enough and you
do not hear a beep, press the start/stop button
[11] . Before
the solution runs through the heating system, the system is
fi lled up with fresh water.
> Descaling solution left over.
Save the remaining descaling solution for next mainten-
ance. One pack (2 bottles) can perform three descalings.
►
Remove the funnel [14] .
► Replace the cap [15] .
►
Switch off the machine to end the descaling program.
► Switch on the machine with the on/off switch [16] .
►
When the fi lter has fi nished dripping, clean the jug. Make
sure that there is no solution left.
► Continue with the rinsing stage.
INSTRUCTIONS
9
10
Beep = Stop!
START
STOP
2x
11
12
13
16
14
15
OFF
ON
I
O