17
3.5. Configuration of the push operation mode
Configuration can be loaded with
DM-Set
, but there is no dedicated menu item for
these settings. The configuration file must be edited manually.
The following
DM-Set
configuration file items are necessary to configure this mode.
- Data Push setting (using DMSet):
•
GPRS always ON: unchecked
•
ping IP-address host: host, user, password:
ftp://username:password@host/path
using IRA(ITU T.50) character set
Some parameters cannot be set ont he DMSet GUI, these must be defined by
direct editing the config file in a text editor.
- Config file keywords:
•
smp.always_on = 0
•
smp.connect_on_timer = 1
•
conn.ping_host = ftp://username:password@host/path
Example: ftp://device001:[email protected]/upload
There can be defined a port number in the ftp upload URL. If the ftp port other
than 21, eg. 1021 the port number must be defined.
Example: ftp://username:password@host:1021/path
ftp://device001:[email protected]:1021/upload
•
smp.connect_interval = 28800
Connect interval counted in seconds.
•
smp.connect_start = YYYYMMDDWWHHmmSS
