EU
o
Databits: 8
o
Parity: No
o
Stopbits: 1
o
Bandwith control: no
For the proper communication of the modem, you have to configure the APN settings of the
SIM – as PIN code, APN, username and password. These all can be configured by using the
WM-E Term
®
software through the RJ45 connection.
For the successful operation of the communication module it is necessary to have appropriate
signal strength.
If you want to read out the meter parameter values during the PC-modem connection, after the
RJ45-configuration has been made, you should select a different configuration port to the meter
as TCP/IP or Optical, etc
.
3.2 Configuring the modem by WM-E Term
®
The Microsoft .NET framework runtime environment is required on your computer.
For modem configuration and testing you will need an APN/data package enabled, active SIM-
card with.
The configuration is also possible
without a SIM card, but in this case
the modem is performing restart
periodically, and some modem
features will be not available until the
SIM card is inserted (e.g. remote
access).
If the modem has not been connected
to a power source for a long time, it needs to be charged before usage/installation. It takes about
~2 minutes to charge it if the supercapacitor was exhausted / discharged.
See: LED signals part
Download the WM-E Term
®
software by this link from your browser:
https://www.m2mserver.com/m2m-downloads/WM-ETerm_v1_3_32_EN.ZIP
