Step #4:
If you haven’t already done, connect the appropriate antenna (3) to the
modem swing connector.
Step #5:
Connect the wire end sockets of the modem AC cable (1) to the meter, to the
AC power connection points (
red
and
black
wire) -
carefully, because during this,
the meter can be under 100-240V AC supply voltage
! Since now, the modem gets
its power from the meter.
Attention!
NEVER remove the device cover when the modem is powered on!
Step #6:
Attach the modem (I) under the terminal cover of the meter, to the part
designed for it (to the tabs (marked “H”), or to another attachment point.
Step #7:
Replace the
terminal cover (marked “I”) on the meter, slide it on, and secure
it with the screws marked “J”.
H
H
G
Содержание WM-E1S
Страница 19: ...J J I ...
