WM Systems M2M Router NB, Руководство пользователя

Страница: 46 / 60

5.4 Shutdown / halt of the router
To shutdown the router device, first you have to reboot by the System / Reboot menu. When all
the three LEDs blinks at once, the router is restarted and can be switched off safely as soon as you
can – pull out the power connector from the 230V AC electricity plug.
Attention! Never stops the router without requesting the reboot process, and do not
remove the power socket without restarting the router before this action!
5.5 Reset the router
When the router is not reacting or it was not possible to configure properly, push int he Reset titled
low-case button for 10 seconds – by a sharp and thin object. Then the router will be restarted by
the factory configuration, whereas the LED lights will assign it. After a few minutes, the router will
be available and accessible on its default address.
5.6 Password exchange
Open the System / Administration menu.
At the Router password you can fill the new Password and again to the Confirm password
fields. You will be able to login further by this new password.
The default accoung is
root, the default pass is wmrpwd
5.7 Backup and restore of settings
Open the System menu, Backup / Flash Firmware item.
At the Backup / Restore part and Download backup feature push the button
for saving the settings into a file.
Important!
Reconfigure the router on its web user interface!