WM Systems M2M Router NB, Руководство пользователя

Страница: 13 / 60

 You can define the remote monitoring software connection settings of the az Remote
Device Manager
® (optional remote management software for firmware refresh and
reconfiguartion, check QoS).
 Then at the Modem parameters (define special parameters for the connection).
 Define the Logging parameters.
 At the Periodic Ping you can configure the cyclic heartbeat ping interval settings – as a
network checking method feature.
 The daily router reboot can be allowed at the Periodic Reboot menu item.
 The backup of the factory settings is possible at the Factory Configuration (save to a file).
2.7 Services menu
 Here you can setup the DynDNS (dynamical DNS) service settings
 Configure the RS485 settings at Ser2net menu item
 Define the OpenVPN client connection settings.
2.8 Network menu
 Interfaces - Here you can configure the settings of each network interface
 DHCP and DNS settings can be modified
 Hostname can be modified to the router name to identify on network

Static route paths can be also defined
 Diagnostics - you can test network operation and connection health (ping IP address).
 Firewall rules can be declared here as: Port forward, IP router, NAT settings.