WJT ORTHO MLO Dynamic, Руководство пользователя

Страница: 15 / 20

5
6
Type III
4
7
EN-7
MLO Dynamic User Manual
EN
• Pad type III = bottom edge no lower
than the highest point of the buttocks,
top edge about two fingers‘ width
below the tip of the shoulder blade.
Closing the Orthosis:
1. Using the hand straps, loosely close the
front hook-and-loop fastener. (Fig. 4).
2. Check the position of the pad,
and adjust, if necessary.
Adjusting the Circular Compression:
1. Pull the handle of the pulley cord
forward with moderate force (Fig. 5).
2. If necessary, adjust the length of the
pulley cord. To do so, open the handle
on the cord by undoing the hook-and-
loop fastening, and re-tie the knot as
desired (Fig. 6).
3. Adjust the compression so the patient‘s
abdomen is visibly lifted.
4. Attach the handle to the circumferential
strip of loop material on the orthosis or
to the flap on your belly (Fig. 7).
Adjustment:
When tightened, the cable pull will auto-
matically cause the orthosis to adapt to
the patient‘s body shape.