Wizard ON-SP03, Руководство пользователя

Страница: 6 / 12

Operating Instruction
Open the battery cover on the back of the product. Install 4
AA batteries or connect the 5V power adapter to the micro
USB port.
Turn the power switch On.
When the forehead or wrist is 1~5cm away from the
infrared sensor, the product will automatically detect the
body temperature and report the results by voice.
Place your hand 5cm below the liquid outlet. After infrared
sensor sensing your hand, it will automatically dispense
hand sanitizer for disinfection.
Before using the product, the product should be fixed using
the supporting bracket or other methods, and the product
should not be inverted or tilted.
This product uses 4 AA batteries, please do not use used
and new batteries together, so as not to affect the use of the
product.
Before using hand sanitizer, please observe the remaining
amount of hand sanitizer. If the hand sanitizer is
insufficient, please refill in time.
5
Instructions
Note:
Function Key Description
Keys
+
_
Set °C/°F Mode
Volume
Down
Short Press Long Press
Volume Up Language Switch
Liquid volume selection: In this mode, press
the - Key again to select the liquid volume
size adjustment into 3 modes. The
corresponding screen displays L1, L2 or L3.
When not operating about 2 seconds, the
device will automatically turn to standby
mode.
Hold the - Key then switch on the power
Key. It will enter sanitizer outlet pipeair
draining mode. This mode isused for the
product when the sanitizer liquid isload at
the first time. Liquid sanitizer can only
dispense when the redundant air in the pipe
isdischarged. Then release the - Key to exit
and enter standby.
Temperature Compensation mode. Press
the + or - Key to adjust the temperature
compensation range + / - (1°C). Then press
SET Key to exit.
•
•
•
1.
2.
3.
4.