28
WT-2003 3G VIDEO DESKPHONE
WT-2003 – USER MANUAL – Rev1.0 – Technical Support:
COPYRIGHT ©2011 WITURA TECHNOLOGY SDN BHD
Change phone code:
When you turn on the
[Phone lock]
function, you should
input the password every time turning on the phone. If you want to change the
password or turn off phone code function, please choose
[Change phone code]
to
change phone code or set
[Off]
.
Change PIN2:
You can change PIN2 code. Press
[MENU/SELECT]
key to input the
old password and then input the new password.
Attention: When you turn on (turn off) this function and add (change, delete) FDN code,
you will use this PIN2 code.
You can set connection parameters.
USB:
You can choose PC sync, USB and Dial up.
Data account:
The default account is China Unicom. You also can create a new
account and you also can do the operations: create, check, edit and delete for the
new data account.
You can restore all parameters as factory default settings. You also can choose restore
some settings.
In the idle state, press
[MENU/SELECT]
to get into the function main menu and choose
[Tools
Alarm]
There are three groups of alarms
[Alarm 1]
,
[Alarm 2]
,
[Alarm3]
and you can set
them separately.
Edit: You can set the alarm time and you can set
[Time]
,
[Alarm alert]
,
[Once]
,
[Everyday]
,
[Alarm interval]
, and you can press
/
to choose them. Press
[MENU/SELECT]
to save all settings.
On:
After you finish the settings, you can choose to turn on this alarm.
Off:
If you have turn on one alarm, you can choose to turn off this alarm.
10.6 Connection
Settings
10.7 Reset
Settings
11. Tools
11.1 Alarm
