20
WT-1041 3G Camera
WT-1041 – User Manual – Rev.1.2 - Technical Support:
COPYRIGHT ©2009 WITURA CORPORATION SDN BHD
The host and share number can monitor the status of WT-1041 3G Camera via the
message.
1.
Input the following message via the phone:
In English: Report status
2.
Send the message to WT-1041 3G Camera
3.
If succeed, WT-1041 3G Camera will return the status report: the status of
video/audio recording, power percent (displayed when WT-1041 3G Camera isn’t
charged), T card memory and phone memory.
When TF card has full memory, WT-1041 3G Camera will send a message to the host:
“Memory Full”.
With built-in cache memory, when there is no TF card or TF card is full, WT-1041 3G
Camera will use the phone cache memory to temporarily store the Photos taken and
send as MMS immediately; User can’t access to the built in Phone cache memory. But
the device can alert the user when the memory is full and allow the user to delete the
phone cache memory. The response SMS is:”Cache Memory Full”.
Note:
Video recording, photo taking and audio recording have the priority as follows: video
recording> photo taking>audio recording. That is:
1.
When the video recording activates, 3G Camera will neglect the message to
activate the photo taking and audio recording.
2.
When the photo taking activates, 3G Camera will neglect the message to
activate audio recording, but response the message to activate video recording.
3.
When the audio recording activates, 3G Camera will response the message to
activate video recording and taking. At this moment, audio recording will stop.
Status Report
Full Memory Note
