13
WT-1041 3G Camera
WT-1041 – User Manual – Rev.1.2 - Technical Support:
COPYRIGHT ©2009 WITURA CORPORATION SDN BHD
The Master Reset function allow to make the device return to factory settings, like
clearing both the Host and Share numbers ready set in the device, and set the password
to default 888888 as before;
1.
Input the following message via phone:
In English: Master Reset *Password
2.
Send the message to WT-1041 3G Camera
If succeed, WT-1041 3G Camera will return a message “Master Reset OK”
The host makes video call to WT-1041 3G Camera via the phone. After get through, you
can view the video monitored, and the WT-1041 3G Camera will enter the monitor mode.
When WT-1041 3G Camera is in Video or Audio recording mode, if there is a host
call incoming, WT-1041 3G Camera will pause and save the recording, and then get
through the video call from the host, in order that the host can monitor in real
time. When the video call ends, WT-1041 3G Camera will continue recording.
Warning:
Please do not hide your phone number when you make video call to 3G Camera,
otherwise the product can’t recognize the caller and get connected. If the caller
number (Host or Share number) are hidden due to network connection (example in
International Roaming…), the device will not recognize the caller and get through.
Note:
Please make sure that your phone number is host number is host number or share
number, because only these two kinds of numbers can make video call to 3G Camera
Master Reset
5. MAIN
FUNCTION
Real Time Monitor
