Flatfire
Direct Vent Gas Fireplace
5. AUTOMATIC IGNITION – Using the Remote
t the center of the
firebo
own on the
pr
itch (1)
to “ON” pos
o
nd large
e
e
ighest setting.
e
6.
t at the
inside of firebox. Refer to the control
establish the pilot gas
flow. Light gas at the pilot with a match.
t
lit, reinstall the window and set
b (2) to “ON” and turn Flame
nt knob (3) up
(
4
)
or down (
3
)
se the flame buttons on the
control to adjust the flame height.
FLAME HEIGHT ADJUSTMENT
1. On the touch pad (illustrated on previous page)
se the flame height or
tap the
the
e
ll
r
3.
the right
TO
1.
d
2.
3.
4.
1.
Cel
pre
rem
2. To set the time on the remote, first note that the
t
cha
e large and
sm
ously).
Press the large flame button to set the hour and
the
change the minute.
Pre
mode or simply
wa
turn to the
a. Locate the pilot inside a
x. On the control valve sh
evious page, set the ON/OFF sw
ition, the MAN-knob (2) to “ON”
position; and Flame Adjustment knob (3) t
lowest setting (
3
).
b. On the remote control handset (shown
below), press the star button (
) a
flame button ( ) simultaneously; a short
acoustic signal confirms the start has
begun.
c. Further short acoustic signals indicate th
ignition process is in progress. When th
pilot is lit, the Flame Adjustment knob will
automatically rotate to the h
d. Press the small flame button ( ) on the
remote control handset to reduce the flam
height.
MANUAL IGNITION
a. With the window off, locate the pilo
center
valve shown on the previous page and set
ON/OFF switch (1) to “ON” position, MAN-
knob (2) to “MAN” position, and Flame
Adjustment knob (3) to lowest setting (
3
).
b. Push down the metallic core with a pen or
similar instrument to
c. Continue holding down metal core for abou
10 seconds; after release, pilot should
remain lit. If the pilot will not stay lit after
several tries, turn the gas control knob (1)
to OFF (
3
) and call your local service
technician or gas supplier.
d. If the pilot is
press button (A) to increa
press button (C) to decrease the flame height or
set at pilot flame. For fine adjustment
button (A) or (C).
2. On the remote control handset press the large
flame button ( ) to increase the flame height or
press the small flame button ( ) to decrease
flame height or set at pilot flame. For fin
adjustment, tap the large/small flames. For
quick flame adjustment press the large or sma
flame button for 1 second to set to high fire o
pilot flame.
The flame can also be adjusted by raising or
lowering the Air Control handle on
hand side of the firebox.
TURN OFF APPLIANCE
AUTOMATIC SHUT-OFF
(using the touch pa
- shown on previous page): Press the red dot
(
z
) button (B) on the touch pad to shut-off the
appliance, including pilot flame.
AUTOMATIC SHUT-OFF
(using the remote
control handset): Press and hold the small
flame button on the remote control handset to
shut-off the main burner gas flow. Press the red
dot (
z
) button on remote to shut-off the
appliance, including pilot flame.
MANUAL SHUT-OFF
(using the using control
valve as shown on the previous page): Press
on the ON/OFF switch (1) to OFF to shut-off the
appliance, including pilot flame.
TO TURN OFF THE GAS SUPPLY TO THE
APPLIANCE,
close the shut-off valve on the
gas supply line to the appliance.
SETTING THE TIME ON THE REMOTE
The display on the remote control handset can
either be a Fahrenheit/12 hour clock or a
cius/24 hour clock. To change the setting
ss OFF and the small flame button on the
ote until the display changes.
display is flashing (either when
nged or by pressing both th
all flame buttons simultane
small flame button to
ss OFF to return to manual
it and it will automatically re
the MAN-kno
Adjustme
manually or u
remote
manual mode.
he battery is
Page 21 of 25
Version 10-09
