Braking System EBRA20
Operating instruction
3.1
Installation of EBRA20 to the car
frame crosshead beam
The installation could be done during car frame
assembling (refer to chapter crosshead beam
installation) or also afterwards if the elevator is to
be modernized.
Check that there is two spare wires in trav-
elling cable (A) - otherwise install a new
travelling cable.
(
1
) Fix car sling in position to guide (if modern-
ization)
(
2
) Remove the old sliding shoe of the car (B) and
possible other fixings above the car frame
crosshead beam
(
3
) Fix the adapter plate(s) (C) to the crosshead
beam - drill fixing holes ø14mm to the beams
if required.
Take care of tightening torque
Screw M12: 80Nm
THE LMC LIFTCOMPONENTS MANUFACTURING AND COMMERCE COMPANY
Änderungen vorbehalten!
Subject to change without notice!
3
Installation
Blatt/
sheet
D7AJMGB.007
Datum/
date
23.05.2002
Stand/
version
23.05.2002
Geprüft/
approved WAT/MZE
(
1-3
)
Screw package
601775G04
B
C
