6.2.1
Checking and changing the brake shoe
(
1
) Put a clamp to the brake magnet to ensure
that the brake magnet will not release during
the brake shoe changing process
(
2
) Remove the Lubricator cup
(
3
) Open the M5 screws which are used to fix the
brake shoes
(
4
) Turn the brake shoes carefully out so that a
M5 hole comes visible and put some assisting
pin to the hole
DO NOT DROP the brake shoes to the shaft
as they are frag-ile hardened steel and may
be broken if dropped.
(
5
) Take the brake shoe out from the cutting it is
positioned in and check its condition. Change
if needed
6.2.2
Checking and changing the brake fork
sliding elements
(
1
) Push the upper sliding element downwards
along the guide rail and the lower one
upwards
(
2
) Take the parts out for examination by fingers
(
3
) Change if needed
Blatt/
sheet
D7AJMGB.015
Datum/
date
23.05.2002
Stand/
version
23.05.2002
Geprüft/
approved WAT/MZE
THE LMC LIFTCOMPONENTS MANUFACTURING AND COMMERCE COMPANY
Änderungen vorbehalten!
Subject to change without notice!
Braking System EBRA20
Operating instruction
