Wittke StarLight Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 108

Wittke StarLight Скачать руководство пользователя страница 15

2

Safety

Safety is always of prime importance when operating
any type of equipment. All operators working with the
W

ITTKE

™ front-loader garbage truck must be aware of

the safety practices and features detailed in this
section.

Conventions

Basic Safety Notions

The following safety notions are related to the use of
the W

ITTKE

™. It is important to point out that the safe

use of the vehicle remains the user’s responsibility. He
must heed all safety notions explained in this manual
and on the decals found on the vehicle.

Danger!

Indicates a hazardous situation which, if
not avoided,

will

result in serious injury or

death.

Warning!

Indicates a hazardous situation which, if
not avoided,

could

result in serious injury

or death.

Caution!

Indicates a hazardous situation which, if
not avoided, may result in

minor or

moderate injury.

Danger!

Always be aware of the vehicle’s
surroundings to make sure that no
pedestrians, passersby, bystanders, or
other people or vehicles are in any way
exposed to any danger caused by the
use of the W

ITTKE

™.

«
...
13
14
15
16
17
...
»

Содержание StarLight













































































































Отзывы:

Нет отзывов