Wittke StarLight Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 108

Wittke StarLight Скачать руководство пользователя страница 100

90

Operating the W

ITTKE

™

Unloading Refuse

Once the body of the W

ITTKE

™ is full, drive the unit to the landfill or an appropriate area for

unloading purposes.

Preparing to Unload Refuse

To prepare your W

ITTKE

™ unit for unloading:

1.

Find an appropriate dump location. The truck must be on solid, level ground. Adequate
clearance must be provided to allow the opening of the tailgate.

2.

Straighten the wheels.

3.

Set the parking brake.

4.

Turn on the hydraulic pump (see

Pump Switch

on page 57).

5.

Lower the arms completely.

6.

Remove both tailgate safety pins (see Figure 2-13).

Unloading a W

ITTKE

™ Unit

To unload refuse contained in a W

ITTKE

™, do the following:

1.

Press the Tailgate Open switch on the control panel (see Figure 3-15) and keep it pressed until
the tailgate is fully open.

N

OTE

:

As soon as the tailgate is unlocked and opened, an in-cab buzzer and a back-up alarm will
sound. Also, during the upward movement of the tailgate, both the Tailgate Open switch and
the Tailgate Close switch flash red. The Tailgate Open switch will turn green when the tailgate
reaches its fully open position.

I

MPORTANT

:

The tailgate must be fully open prior to unloading refuse.

2.

Apply the foot brake and release the parking brake.

N

OTE

:

The foot brake should be released while you unload, and allow the force of the moving load to
push the unit forward. Always be alert of what is in front of the truck.

3.

Press the green button on the control panel to fully extend the packer all the way through the
body so that the refuse contained inside the body can be ejected completely. See

Pack Push-

Button (green)

on page 65.

Caution!

Serious injury or mechanical damages could result if ground is unstable.

«
...
98
99
100
101
102
...
»

Содержание StarLight













































































































Отзывы:

Нет отзывов