manualshive.com logo in svg

Wittke Pendulum, Руководство оператора

Поделиться
Скачать
Wittke Pendulum Скачать руководство пользователя страница 88

78

Operating the W

ITTKE 

P

ENDULUM

™

Right-Hand Side Driving Position (optional)

If your unit is equipped with a right-hand side driving position, the following general procedure must 
be followed when you need to change driving positions.

Before you operate your front-loader using the optional right-hand side driving position, take the 
time to read the chassis manufacturer’s manual so that you can exactly know what you have to do. 
Also, check with your supervisor for regional rules about speed and safety restrictions.

When changing driving positions, follow these steps (general procedure):

1.

Stop the vehicle and set the parking brake.

2.

Turn off the hydraulic pump (see 

Pump Switch

 on page 58).

3.

Move to the desired driving position (LH or RH).

4.

Shift the O

PERATING 

P

OSITION

 switch to the desired position (LH or RH).

Figure 4-4      O

PERATING 

P

OSITION

 switch

5.

Adjust mirrors and monitor to the chosen driving position.

6.

Start the engine.

7.

Turn on the hydraulic pump (see 

Pump Switch

 on page 58).

8.

Adjust the front loader arms to a position suitable for travel to the next stop.

Warning!

Set the parking brake before leaving the cab for an extended period of time or when 
stopping on an incline. Do not rely on work brake.

Warning!

Use the parking brake when leaving the cab for an extended period of time rather than the 
right-hand side work brake (if equipped). Consult the chassis OEM.

Содержание Pendulum









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды