On ALARM 1:
• press
UP
once:
on the display, A1 is activated
• press
UP
twice:
disappear, A1 is deactivated
On ALARM 2:
• press
UP
once:
on the display, A2 is activated
• press
UP
twice:
disappear, A2 is deactivated
Stopping the alarm
You will be woken by the alarm at the set time, and the sound will become more and more intense as the
alarm continues.
•
Snooze
- Press the
SNOOZE•LIGHT
button to stop the alarm for approx. 5 minutes.
•
Switch off the alarm completely
- Press any button on the base unit (apart from
SNOOZE•LIGHT
), to stop
the alarm. The alarm will go off again after 24 hours.
•
Automatic stop function
- If you do not press any buttons, the alarm will automatically switch off after 2
minutes. The alarm will go off again after 24 hours.
Snooze function
Press the
SNOOZE•LIGHT
button once when the alarm sounds.
The alarm signal is paused for approx. 5 minutes, and the
symbol will flash on the display. Afterwards,
the alarm will sound and wake you up again. You can repeat this process multiple times.
Weather information
Temperature and humidity
This area of the display is divided into two parts. The left part shows the data measured by the wireless
sensor; the right part shows the information gathered by the base unit.
Information:
If “LL.L” is displayed for the indoor temperature, the measuring range of inside temperature is below -
14.2°F.
If
“HH.H” is displayed for the indoor temperature, the measuring range of inside temperature is above
+122°F.
If “LL.L” is displayed for the outdoor temperature, the measuring range of outside temperature is below
- 40°F.
If
“HH.H” is displayed for the indoor temperature, the measuring range of outside temperature is above
+158°F.
