SP
+
Transport and storage
Revision: 03
2022-D033540
en-9
4
Transport and storage
4.1
Scope of delivery
z
Check the completeness of the delivery against the delivery note.
L
Missing parts or damage must be notified immediately in writing to the carrier, the
insurance, or
WITTENSTEIN alpha GmbH
.
4.2
Packaging
The gearhead is delivered packed in foil and cardboard boxes.
z
Dispose of the packaging materials at recycling sites intended for that. Observe the locally
valid regulations for disposals.
4.3
Transport
Specifications on the weights, refer to Chapter 3.5 "Weight".
4.3.1
Transport of gearheads up to and including size SP
+
140
No special transport mode is prescribed for transporting the gearhead.
4.3.2
Transport of gearheads as of size SP
+
180
For gearheads as of size SP
+
180, a support bore (A) is provided for a ring screw (e.g. acc. to DIN
580). The ring screw is used for attaching the gearhead securely to the hoisting equipment.
4.4
Storage
Store the gearhead in horizontal position and dry surroundings at a temperature of 0 °C to +40 °C
in the original packaging. Store the gearhead for a maximum of 2 years.
For storage logistics, we recommend the "first in – first out" method.
Hard knocks, for instance because of falling or hard dropping, can
damage the gearhead.
z
Only use hoisting equipment and transports with sufficient capacity.
z
The maximum permitted lift capacity of a hoist may not be exceeded.
z
Lower the gearhead slowly.
Suspended loads can fall and can cause serious injuries and even
death.
z
Do not stand under suspended loads.
Gearhead size SP
+
Support bore (A) [Ø]
180
M8
210
M10
240
M12
Tbl-4: Support bore on the gearhead
A
