Witt WS958 W XM-2, Руководство пользователя и инструкция по установке

Страница: 52 / 56

48
Cleaning and maintenance
The hood should be cleaned regularly to ensure flawless operation and extend the hood’s operating life. Make sure to
replace the grease and charcoal filters according to the manufacturer recommendations.
NOTE: Before performing any maintenance work, disconnect the hood from the power supply.
Cleaning the hood:
The hood surface must be cleaned with a soft sponge with water and a mild detergent. Dry all surfaces with a soft cloth
after cleaning. Do not let water seep through to the electronic parts of the hood and cause a short-circuit. Risk of
personal and product injury!
Always avoid using the below cleansing agents, as this may result in product injury:
- Cleaning agents containing sodium carbonate, acid, solvents or chlorine.
- Scouring/abrasive cleaning agents, including brushes and old sponges that may contain residues from these.
Metal grease filter
The grease filter must be cleaned once a month either by hand or in the dishwasher. Use a mild detergent (avoid using
concentrated detergent) and hot water (max. 60° C).
If the filter is cleaned in the dishwasher, place it vertically in the lower rack and wash at max. 60 °C with a mild
dishwasher detergent. Ensure that the spray arm is able to rotate freely.
Attention: When washed in a dishwasher, the grease filter may discolour slightly. This does not affect its performance.
ATTENTION: The filters can pose a fire hazard if they are not cleaned according to above directions.
Always avoid using the below cleansing agents, as this may damage the product:
- Cleaning agents containing sodium carbonate, acid, solvents or chlorine.
- Scouring/abrasive cleaning agents, including brushes and old sponges that may contain residues from these.
After the filter has been cleaned, place it on an absorbent material, e.g. kitchen paper or a tea towel. When the filter is
out, clean the accessible parts around the filter support to diminish the risk of fire.