9
To stop the cooking time:
Example for 13 minutes at power 7 :
Action
Control panel
Display
Zone selection
press display [ 7 ] selected
[ 7 ] and control light on
Select « Timer »
press key [ 13 ]
[ 13 ]
Deactivate the units
slide on the “SLIDER“ to [ 0 ]
[ 1 fixed ] [ 0 blinking ]
Valid the units
press display [ 10 ]
[ 1 blinking ] [ 0 fixed ]
Deactivate the tens
slide on the “SLIDER“ to [ 0 ]
[ 0 blinking ] [ 0 fixed ]
Valid the tens
press display [ 00 ]
[ 00 ]
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].
Egg timer function :
Example for 29 minutes :
Action
Control panel
Display
Activate the hob
press display [ ]
zone control lights are on
Select« Timer »
press display [ CL ]
[ 00 ]
Set the units
slide on the “SLIDER“ to [ 9 ]
[ 0 fixed ] [ 9 blinking ]
Valid the units
press display [ 09 ]
[ 0 blinking ] [ 9 fixed ]
Set the tens
slide on the “SLIDER“ to [ 2 ]
[ 2 blinking ] [ 9 fixed ]
Valid the tens
press display [ 29 ]
[ 29 ]
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.
Automatic cooking
All the cooking zones are equipped with an automatic “go and stop” cooking device. The cooking
zone starts at full power during a certain time, then reduces automatically its power on the pre-
selected level.
Start-up :
Action
Control panel
Display
Zone selection
press display [ 0 ] selected
[ 0 ] and control light on
Full power setting
slide on the “SLIDER“ to [ 9 ]
pass from [ 0 ] to [ 9 ]
Automatic cooking
re-
press on display “SLIDER“ [ 9 ]
[ 9 ] is blinking with [ A ]
Power level selection
slide on the “SLIDER“ to [ 7 ]
[ 9 ] pass to [ 8 ] [ 7 ]
(for example « 7 »)
[ 7 ] is blinking with [ A ]
Switching off the automatic cooking :
Action
Control panel
Display
Zone selection
press [ 7 ] from the zone
[ 7 ] blinking
with [ A ]
Power level selection
slide on the “SLIDER“
[ 1 ] to [ 9 ]