8
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them.
There are risks of burn and fire.
Booster function
The Booster function [ P ] and the Double Booster [
] grants a boost of Booster to the
selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high Booster.
Booster is foreseen for example to heat up rapidly big quantities of water, like nuddles
Start up / Stop the booster function:
Action
Control panel
Display
Zone selection
Press key [ 0 ] from the zone
[ 0 ] and control light on
Start up the Booster
Press key [ P ]
[ P ]
Stop the Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]
Start up / Stop the double booster function:
Action
Control panel
Display
Selection of the zone
Press key [ 0 ]
[ 0 ]
Start up Booster
Press key [ P ]
[ P ]
Start up Double Booster
Re-press key [ P ]
[
and P ]
Stop the Double Booster
Press key [ P ]
[ P ]
Stop Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]
Booster management:
The hole cooking hob is equipped with a maximum of Booster. When the Booster function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the Booster level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of Booster allowed :
Heating zone selected
The other heating zone:
(example: Booster level 9)
[ P ] is displayed
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Timer
The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action
Control panel
Display
Zone selection
press display [ 0 ] selected
[ 0 ] and control light on
Select the power level
slide on the “SLIDER“ to [ 7 ]
[ 7 ]
Select « Timer »
press display [ CL ]
[ 00 ]
Set the units
slide on the “SLIDER“ to [ 6 ]
[ 0 fixed ] [ 6 blinking ]
Valid the units
press display [ 06 ]
[ 0 blinking ] [ 6 fixed ]
Set the tens
slide on the “SLIDER“ to [ 1 ]
[ 1 blinking ] [ 6 fixed ]
Valid the tens
press display [ 16 ]
[ 16 ]
The time is confirmed and the cooking starts.
