Page 5 of 11
WITT-GASETECHNIK GmbH & Co KG
Salinger Feld 4-8
: +49 (0)2302 89010
www.wittgas.com
Gas Safety- & Control Equipment
D-58454 Witten
Fax: +49 (0)2302 89013
3.2
Start logging using the “Wizard”
If you are in the measurement window:
Press
to proceed to the main menu.
Select the menu item «Start Wizard» with
.
All settings that are important for logging are indicated one after another.
The settings can be acknowledged or altered on demand. See Section ### 3.3 for details.
-
«Delete Log data»
Yes / No
-
«Interval»
confirm time / alter time / stop Wizard with
.
-
«Start type»
confirm setting / alter start type
-
«Countdown»
confirm time / alter time / stop Wizard with
.
(indication only on selection of certain «Start types»
-
«Start logging»
Yes / No
Logging will start, as soon as the actual selected start condition is fulfilled
(see menu item «Start type», Section 3.3.2).
During logging the display will be deactivated.
3.2.1
Check / stop a running logging
To check weather a logging is in process, press
or
.
If this is the case, «Logging…» will be indicated for some seconds.
To stop logging, press
.
3.3
The menu «Log Settings»
In this menu, you can set a start condition for logging and the time interval for storing measurement
values during logging.
Select (
) «Log Settings» in the main menu and confirm with
.
The menu «Log Settings» is indicated. The menu items are:
3.3.1
The menu item «Start logging»
Select menu item «Start logging» in the main menu and confirm with
.
After selection, the actual set parameters are indicated in several windows (use
to change
between these windows). Alterations are not possible in these windows.
After pressing
, a security query must be confirmed with “Yes” to start logging.
Start Wizard
Log Settings
Device Settings
NFC Enable
Shutdown
Start Wizard
Log Settings
Device Settings
NFC Enable
Shutdown
Start logging
Start type
Interval
Countdown
Show log data
