Witt OXYBABY 6 Скачать руководство пользователя страница 10

Страница: 10 / 47

09051301

Page 10 of 47

WITT-GASETECHNIK GmbH & Co KG

Salinger Feld 4-8

: +49 (0)2302 89010 www.wittgas.com

Gas safety & process technology

D-58454 Witten,
Germany

Fax: +49 (0)2302 89013 [email protected]

7.2 Opening

/closing

needle cover

Open Close

Recommendation!
Open the needle cover immediately before a measurement and then close it again immedi-
ately after each measurement.

7.3 Conducting

measurements

Caution!

Adapt the OXYBABY

before the measurement to any changes in climate, to avoid any falsi-

fied test results (see Technical data).
This also applies to packaging which is stored at higher or lower temperatures than the OXY-
BABY

We advise calibrating the OXYBABY

before the first measurement

(see Chapter 8.9 and 9).

You can increase measuring accuracy by

performing two measurements at a very low temperature or by extending the measuring
time.

performing two measurements or extending the measuring time on successive meas-
urements on packages with very different gas concentration levels.

7.3.1

Sample Hold measurement

Change to the “sample hold” operating mode if required (see Chapter 8.4).

Select any product, user or line (production line) (see Chapter 8)

Stick foam pads onto the packaging that you wish to measure.
This seals the pierced position.

Open the needle cover (see 7.2)

Pierce the packaging through the foam pad.

Caution!
Do not jab into the fluid or the packaged product. Otherwise the OXYBABY will be soiled,
the needle or hose may clog up or the sensor may be damaged.

Start measurement with

The remaining measuring time is shown by the OXYBABY

at the top right of the display.

You can extend the measuring time during the measurement.

Press key

again, the measurement continues, if you press the key

again briefly.

Close the needle cover (see 7.2)

The last current measurement is shown on the display.

The measurement ends automatically in the Sample Hold mode

At very low temperatures, you may also need to run two measurements to increase the
measurement accuracy.

Содержание OXYBABY 6
















































Результаты поиска

Содержание OXYBABY 6

Отзывы:

Похожие инструкции для OXYBABY 6

Бренды по названию

Популярные бренды

Witt OXYBABY 6, Руководство по эксплуатации

Результаты поиска

Содержание OXYBABY 6

Отзывы:

Похожие инструкции для OXYBABY 6

Бренды по названию

Популярные бренды