background image

2.3  Rechargeable batteries

WARNING!
Risk of injury in the event of improper use of

rechargeable batteries!
In the event of improper use of rechargeable

batteries, there is a risk that they will explode,

or that substances harmful to health could

escape that can cause burns in the event of

contact with skin, acute toxicity in the event of

ingestion, or blinding in the event of contact

with the eyes.
– To recharge the rechargeable batteries, con-

nect the ChronoMaster Air to the charger

provided, or to a PC.

– The rechargeable batteries can remain in the

ChronoMaster Air when being recharged

from a PC or laptop.

– Never short circuit the contacts (positive or

negative terminal) of the rechargeable bat-

teries.

2.4  Intended use

The ChronoMaster/ChronoMaster Air precision measuring

device is intended solely for measuring mechanical watches to

determine the rate deviation, amplitude and beat errors.
The device can test watches of any size due to the clamping

jaw.
The intended use includes compliance with all the information

in this document.

Any use beyond or other than the intended use shall be con-

sidered misuse.

NOTICE!
Material damage due to misuse!
Misuse of the device can result in material

damage.
– Never immerse the device in water or other

liquids. Keep the device away from rain and

wet conditions at all times.

– Never clamp any objects other than watches

or watch movements on the device.

For ChronoMaster Air only

Misuse

 

  

 

24.03.2021

Precision measuring device ChronoMaster / ChronoMaster Air

18

Содержание ChronoMaster



















































Отзывы: