www.witeg.de
witeg Labortechnik GmbH, HS-30E Homogenisierer
9
Long life by simply and solid construction.
Constant speed in spite of viscosity fluctuation.
Motor provided with overload and overheat protection.
Stepless variable adjustability of every stirrer concerning to the continuous bored chuck.
Smooth increase of speed for higher safety.
3.2 General survey
4 Packing contents
quantity
DH.WOS01011
DH.WOS01010
1
HS-30E
1
Allen key
1
body holder
1
chuck key
1
operating manual
1
CL200
clamp
1
ST110
stand
5 Positioning the device and commissioning
1. Follow especially the safety instructions marked with following symbol:
2. Remove the package and perhaps soiling carefully.
3. If there are any unexpected transport damages, please inform your forwarder and your
costumer service.
4. Attach the clamp to the tripod rod.
5. Stick the device at the clamp and tighten the screw.
6. Check that each connection fits close.
7. Fix the stirrer in the chuck with included chuck key.
8. Before you connect the device with the electrical outlet, please let some time laps until
the device is acclimatised.
9. Make sure that you follow all safety instructions.
10. Connect the device with the power outlet.
11. Switch the device on and start the process.
knob for speed adjustment
main switch
chuck
clamp
stirrer
stand rod
