WisyCom RTE25, Руководство пользователя

Страница: 6 / 12

5
P
UTTING
I
NTO
O
PERATION

Connect the power supply to the XLR4-M connector ⓫ (see optionals PSP25-L )

Connect the antennas to the N-F antenna connectors ❿ (see optionals AGN00 / AMB 05 )

Connect the mixer or microphone to the Line in connector (
❽ or
⓬), select Front or Rear
with the switch
❾ and
Line or Mic with the switch
❼

Chose the desired frequency rotating the Channel selector ❷ (select the same channel of
the receiver)
NOTE: a label placed on the top of the transmitter shows the pre-configured frequencies
list.

Check that the gain controller ❹ is not set to the maximum

Put the selector ❶ to ON and verify the led indicator is turned on

Adjust the gain, controlling that it not go on peak and the light of the led-bar doesn’t
become red. After the regulation, lock the gain with the gain lock
❸ to prevent accidental
movement