MTP51-JP User Manual
4
P
OWERING UP
Move the wireless power switch (see Fig. 1) in “I” position to activate wireless transmission: the
front LED
❷
lights up red and then green when the RF transmission power is on (blinking when
battery is low!)
S
ETUP CONTROL
Open transmitter Body to access the “display and controls” area (Fig. 3):
❶
Graphics Display (
OLED
)
❷
Channel selection buttons (
ch
)
❸
MIC gain setup buttons (
gain
)
❹
3 position selector (
up
/
down
/
click
)
Fig. 3
OLED Power UP (OLED IS IN OFF CONDITION)
Pushing down selector (
click
), oled turns on. A first menu with Serial Number and brand logo is
displayed, then <status> menu enters automatically.
Turn on the transmitter pushing and holding selector (
click
) > 2 sec, Serial Number menu is displayed
till (
-/+)
is selected.
OLED Power DOWN (OLED IS IN ON CONDITION)
Pushing and holding selector (
click
) > 2 sec, display is turned off.
Display turns off automatically after 15 sec, unless in <AUDIO> menu (with audio level < 5% from
nominal).
+
-
CLICK
❶
❹
❸
❷
