WisyCom MPR30-IFB, Руководство пользователя

Страница: 20 / 32

MPR30-IFB User Manual
Rev. 03
19
T
ROUBLESHOOTING
Problem Possible cause Possible solution
“HW init failed” message
appears on the display Error during the hardware initialization
phase
-reset the receiver, if the
problem persists send to repair
at Wisycom Repair Centre
“Battery Low” message
appears on the display
Low level on the battery
- change batteries or
- recharge the batteries
“Battery charge failed”
message appears on the
display
Error during batteries charger
(damage batteries or wrong batteries)
- change batteries
“I2C communication error”
message appears on the
display
Communication error on bus I2C
- send to repair at Wisycom
Repair Centre
“Device ID copy1 invalid
Memory recovered”
message appears on the
display
Error during the initialization phase. The
CRC-16 check of device data (copy 1)
detects error. - nothing (the receiver
automatically replace the
corrupt copy1 with copy2)
“Device ID copy2 invalid
Memory recovered”
message appears on the
display
Error during the initialization phase. The
CRC-16 check of device data (copy 2)
detects error. - nothing (the receiver
automatically replace the
corrupt copy2 with copy1)
“RF copy1 invalid
Memory recovered”
message appears on the
display
Error during the initialization phase. The
CRC-16 check of RF data (copy 1) detects
error. - nothing (the receiver
automatically replace the
corrupt copy1 with copy2)
“RF copy2 invalid
Memory recovered”
message appears on the
display
Error during the initialization phase. The
CRC-16 check of RF data (copy 2) detects
error. - nothing (the receiver
automatically replace the
corrupt copy2 with copy1)
The Serial Number of the
receiver in the Info menu
is UNCAL Error during the initialization phase. The
CRC-16 check of device data (copy 1 and
copy 2) detects error.
- send to repair at Wisycom
Repair Centre
The errors 87 (Device ID
copy 1 ) and 88 (Device ID
copy 2) appear in the
errors list
Error during the initialization phase. The
CRC-16 check of device data (copy 1 and
copy 2) detects error.
- If the Serial Number in the
Info menu is UNCAL, then send
to repair at Wisycom Repair
Centre
- If the Serial Number in the
Info menu is not UNCAL,
continue to use the receiver
The errors 89 (RF mem.
copy 1 ) and 8A (RF meme.
copy 2) appear in the
errors list
Error during the initialization phase. The
CRC-16 check of RF data (copy 1 and copy
2) detects error.
- contact Wisycom for more
information
The receiver is not able to
tuned on the selected
frequency and the ON led
indicator remains red
Error during frequency tuning
- try to change the frequency, if
the problem persists send to
repair at Wisycom Repair
Centre