18
3
3.
Installation by Steps
This section will lead you through the installation of 802.11g USB 2.0 Adapter
(both software and hardware) in detail. People who are familiar with the
installation and settings of wireless device may refer to Quick Start Guidance
to establish a network in a snap.
To establish your wireless network connection, the following steps should be
executed:
1. Install the software by using the installation CD.
2. Install the 802.11g USB 2.0 Adapter.
3. Install the required network protocols to communicate with your network.
Mostly, you will need to set the TCP / IP protocol.
The product is designed to operate under Windows 98SE, Me, 2000 and XP.
The installation procedure is about the same. Please follow the installation
wizard to install the software.
3.1 Installing WLAN 802.11g USB2.0 Adapter
Note!
Please install the software
before
inserting the 802.11g USB 2.0
Adapter.
1.
Insert the Installation CD.
Insert the installation CD into your CD-ROM
drive. The
Setup
program automatically starts.
2. Click
Next>
.
