25
derailleur or hub gear and ensure all gears can be
selected
17
Ensure side stand supports bike correctly and does
not interfere with other moving cycle parts
18
Ensure motor wheel turns smoothly and quietly when
rotated by hand in forward and reverse direction
Some additional resistance will
be felt when rotated in reverse
19
Ensure correct chain tension
20
Ensure chain guard is not rubbing on models
equipped with guard
21
Ensure all reflectors are in place on pedals, wheels etc
Electrical Parts
1
Fit and check correct operation of front and rear
lights
2
Check connections for installed components
3
Check throttle returns smoothly to closed position
Adjust if necessary
5
Check functionality of LCD display
Includes selection of five power
assist levels, speed readout,
and all functions are correct as
described in the user manual
7
Check battery locates properly and locks in place
securely
Ensurekeys are present
10
Charge battery off the bike and check charger and
battery functions correctly
Check status lights on battery
Road Test
1
Road test the bike in a safe environment to test
functionality of both electrical and cycle systems as
described in the user manual - check noise and
performance levels
Adjust / correct after test ride.
2
Notify Ampssupport if any manufacturing faults are
identified, providing photographs if possible of any
faulty components.
3
Run through the bike operation, battery charging and
storage instructions and offer safety advice to the
