Wisper 705 Classic 2013 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 33

Wisper 705 Classic 2013 Скачать руководство пользователя страница 15

15

self-locking nuts located beneath the frame brace at the front luggage rack mount and moving the
bracket forward. Retighten the screws securely. See picture below. (Caution – do not remove all
clearance as it will be difficult to remove the battery if this is done).

3.2

The ON/OFF button and Light button

3.2.1

To turn the power on so the pedelec system and throttle work, simply press the ON/OFF

button (marked with a +) on the LED handle bar display for 3 seconds - the battery capacity lights will
illuminate showing the power is on. When the ON/OFF button is pushed again for 3 seconds and the
capacity indicator lights go out you have turned the bike “off”. When the bike is “off” you will not
get any assistance from the battery and motor and the bike is effectively an unpowered pushbike. If
the bike is left for ten minutes without being ridden, the bike will automatically turn off. The four
capacity indicator lights provide an indication of the battery capacity remaining with all four lights
indicating the battery is at full capacity. The display also incorporates a diagnostic function as
described above. If any of the lights flash continuously, refer to the above section for the description
of the fault.

«
...
13
14
15
16
17
...
»

Содержание 705 Classic 2013


































Отзывы:

Нет отзывов