p. 62
➢
If the braking is too soft, the cable must be retightened.
•
Use the 4mm Allen key provided.
•
Loosen the screw by turning it
counter-clockwise.
•
Pull the brake cable back slightly.
•
Tighten the screw by turning it
counter-clockwise.
•
Repeat if necessary to fine-tune it
•
7.4.2 Maintenance of screws:
Check the screws of each part carefully before using the scooter. The screws
must not be loose or too damaged.
•
7.4.3 Adjusting the Stem:
If you feel vibrations while riding, you may need to check the tightness of the
wheel.
➢
Lift up the plastic tabs at the
bottom of the stem on the deck
side.
➢
Use the Allen key to tighten
the screws.
