
p. 42
5.
Then insert the front wheel
support into the stem and lift
the plastic cover off the stem.
Screw in the screws on both
sides of the clamping ring (2
screws for each side) with the
4mm Allen key. Then replace
the plastic cover to cover the
screws.
6.
Unscrew the screws on the
top of the stem with the
4mm Allen key, insert the
handlebar on top of the stem
according to the safety
notches, then put the
retaining cap back on and
tighten the screws
crosswise. Test the strength
of the assembled structure.
You are ready to ride.