WISKA HML - ISO 35, Руководство по эксплуатации

Страница: 11 / 16

HML-ISO_35_ Rev01122009_E.doc
11
5. Operation
1
3 2
Signalling
Pressing the signal button (1) lights the searchlight, so that pressing and releasing of the button
sends light signals.
Torch function
Pressing the signal button (1) and the function button (2) activates the torch mode. When doing so
the lamp lights until one of either buttons is pressed.
SOS function
Pressing the function button (2) sends a permanent SOS signal. This can be stopped by pressing the
signal button (1).
Attention: After starting the SOS function you can’t stop immediately the function by pressing the
function button (2)!
Battery status display
The battery status display (3) lights up if the input voltage is too low. If using the
BatteryPack HML-ISO 35 it should be recharged. (Read Chapter 6.2 Charging the
PowerBox ISO 35)
Operation