WISKA HML - ISO 35, Руководство по эксплуатации

Страница: 10 / 16

HML-ISO_35_ Rev01122009_E.doc
10
4. Commissioning
4.1 Unpacking
Check the delivery. Do not start the unit if there is transport damage or missing parts! Contact
WISKA or our sales partner in your country. The address can be found at the back of these
instructions or on the internet under www.wiska.de.
Think about the environment and send the packing for recycling!
4.2 Electrical connections
Risk of electric shock!
Electrical connections may only be carried by a qualified electrician.
Please ensure that the mains connection is off and that nobody can accidentally energise the
connections during installation!
The circuit diagram is also included or can be found in chapter 3.4
Circuit diagram
.
Electrical connection values (for fixed connections)
Mains voltage: 12V DC- 24V DC at 40 W
Socket: Concentric socket (WISKA Type DK 503)
Required mains fuse: see electrical drawing.
Mains connection
•
Observe the relevant national and international regulations!
Before start-up
•
Check for correct installation. Wrong connections can cause damage.
•
Check for correct connection of the neutral / ground!
•
Reinsert the fuse.
Commissioning