Wishbone FOREST FSTB-1, Инструкция по сборке

Страница: 13 / 18

Wishbone Jumbo / Wheelchair Outhouse Assembly Guide
14
Adjust the length of the connecting fixture needed to secure the vent
stack to the outhouse building.
15
Install the connecting fixture to the back of the outhouse. If the stack
must be in the middle of the outhouse, connect the fixture to the roof
slots instead of the back wall.
13
Secure using
SU0611 ( ¼ ” x 1 ½ ”) hex
cap bolt (1) and SA0605
( ¼ ”) hex nut (1)
Adjustable length for
connecting the vent stack
to the back outhouse wall
Drill
17 /
64
” hole on site
for appropriate length
of connecting fixture
Position connecting
fixture and drill four
17 /
64
” holes through the
plastic lumber on the
back wall. Attach with
SJ0614 ( ¼ ” x 2 ¼ ”)
carriage bolts (4) from
the inside and SB0505
( ¼ ”) flat washers and
SA0605 ( ¼ ”) hex nuts
(4 of each) on the
outside.