(2) Press the Motion Detection Button once and the camera will automatically
enter into motion detection mode.
(3) Camera will start video recording automatically when motion is detected.
Once motion is detected, the blue light indicator will blink twice and then turn
off. The camera now is recording video.
(4) To stop motion detection mode, press the Motion Detection Button once
again and the camera will enter into standby mode and the indicator light will
be solid blue.
Attention:
The camera will record a video clip for 3 minutes automatically if a movement is detected.
6) VIDEO/PHOTO FILE UPLOADS
Option 1:
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Connect the card reader to a proper PC computer USB port.
(3) The micro SD card will be recognized as a removable disk drive.
(4) All of your video, photo and audio files can be accessed in the drive.
Option 2:
(1) Power on the camera by pressing Power On/Off Switch on the camera.
Note:
DO NOT
press the Camera On/ Off Button on the remote control at this
time. The indicator light should be
off
.
(2) Connect the camera to a proper PC computer USB port with the USB cable
provided.
(3) Press the Camera On/ Off Button on the remote control to turn on the
camera. The blue indicator light will turn on.
(4) The camera will be recognized as a removable disk drive.
(5) All of your video and photo files can be accessed in the drive.
7) SET THE DATE/TIME STAMP
Option 1:
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Connect the card reader to a proper PC computer USB port.
(3) Removable disk drive folder appears
(4) Click on the drive in the root directory and inside the root directory, create a
time.txt file.
(5) Write the desired date and time in the txt file with the correct format: