Wisely MY-L1390, Руководство пользователя

Страница: 37 / 40

34
g) Please format the computer system, install the software again and test again.
h) Please check if the motherboard gorge is damaged; if yes, please repair or change a new one.
7.13 SOFTWARE ERROR ALERT INTERFACE.
The operation panel can display the alert interface at real-time, which cause by various improper operation or external
disturbance signal. According to the information which display on the panel, it is easy for the user to correct the
wrong operation, and exclude the external disturbance signal.
1. Soft limit stops
When found this kind of error, it shows that the work scope data, which input into the computer is bigger than the real
worktable.
Solution:
Remove the laser head, and make it in the scope of the worktable. Another way is that conceal the “immediately
output order” reset the proper data again, and then download the data.
2. Hard limit stops
When the user operate the machine while does not make the laser head back to the original point .It is easy cause that
the processing area is bigger than the real worktable and when the laser head bump into the “size control signal” the
movement have to cease.
On the other hand, when the machine in a complex environment which have a lot of interference signal, it will also
display this kind of information.
Solution:
Remove the laser head, and make the processing graphic data in the scope of the worktable.
When we find the alert information while the laser head does not bump into the “size control signal” so we can sure,
it is caused by the external disturbance signal. When we meet this kind of situation, please check the ground cable
3. Lack of memory space alarming
Reasons:
a) The number of downloaded files is more than the max. number that the Memory device can read—32
b) The downloaded file is too big and exceeds the size of Memory device
Solving Method:
Make sure that the download files not exceed the total memory of Memory device. Remove the files that we don’t
need, release the memory space.
4. Configuration and firmware mismatching