IPTV
2
IPTV Test Configuration
2.1
IPTV Tabs
Initial screen with main tabs ETHERNET, LINE, SYSTEM and MODULES.
2.2
IPTV Test via Ethernet
From the HOME screen Select
Ethernet
by pressing the F1 key. Before entering the IPTV
module, press the numeric #2 key or move the cursor using the up and down keys to
Ethernet
Configuration
and press
START/STOP
(
Start/Stop
keys may be used as an ENTER key
as well) to configure how to obtain IP addresses (manual or automatic). If the TSW800TP MAC
address is required to be the same of the STB MAC address, the configuration can be done in
this screen also.
More information about the
Ethernet Configuration
item may be viewed at the TSW800TP
basic manual. To enter IPTV module, go back to initial screen, by pressing F1, and press numeric
key 4 or move the cursor to the IPTV item and press
START/STOP
.
2.3
IPTV Test via xDSL
Select
Line
tab and configure the line as described on TSW800TP basic manual. To enter
IPTV module, go to initial screen, by pressing F1 and press numeric key 4 or move the cursor
to IPTV item and press
START/STOP
.
2.4
IPTV configuration screen
Test, via Ethernet or via xDSL, have the same configuration screen:
Wise Telecommunications Industry
4