WISE CONTROL
of the flowmeter for the accuracy of the measurement. This part is required to
make the flow stable, and a priority factor to be considered in the design of the
piping line.
It is recommended to design the Piping Line that the maintenance, repair, inspect
If the flow control V/V was placed in upstream of the flowmeter, it could be
interfered to the flow and the correct measurement could not expected. Hence, it
enough distance from the flowmeter to prevent from effecting on the flow, if
installed in upstream.
INSTALLATION & OPERATION
MANUAL
DOC.NO. : C-QIM-2731-F14
PAGE : 6/10
and calibration of the flowmeter can be done without stopping of the PROCESS.
is recommended to install the flow control V/V in downstream, or keep the
④
Straight Piping Line
It is the straight part of the piping line between the upstream and downstream
⑤
By-Pass Line
⑥
Flow Control Valve
