Wisdom Sage C150m, Руководство пользователя

Страница: 7 / 16

SAGE C150m WISDOMAUDIO.COM 7
Unpacking and Installing the C150m
The Wisdom Audio Sage C150m on-wall speaker is a substantial piece of
equipment. Please exercise caution when unpacking your C150m to ensure that
you do not strain yourself from its (perhaps unexpected) weight.
CAUTION: Do not attempt to lift your C150m while bending or twisting from the
waist. Use your legs for lifting, not your back. Always stand as straight as possible
and keep the C150m close to your body to reduce strain on your back.
The speaker is shipped in a “telescoping” box (three five-sided boxes, one of which
fits snugly inside the other). Gently roll the box over so that its bottom is facing up.
Then carefully cut the tape along the bottom of the box on all four sides. Roll the
box over again so the bottom is on the floor and lift off the top. With one person at
each end, carefully lift the speaker out of the box and lay it on a soft surface (carpet
or similar).
We do not recommend removing the grille on your new loudspeakers. The grille is
an integral part of the design; moreover, the planar magnetic film should never be
touched, as it is tensioned precisely at the factory. The grille plays an important
protective role as well as an aesthetic one.
After unpacking your C150m, keep all packing materials for future transport. If
you need to ship your speaker, only the original, purpose-designed shipping carton
is acceptable. Any other method of shipping this product runs a significant risk of
damage to the speaker – damage that would not be covered by the warranty. (If
you lose your packaging and need
to ship your speakers, replacement packaging
can be purchased from Wisdom Audio.)
Proper Planar Placement
For the C150m the planar magnetic (HF) drivers should always be placed in the
middle of the two woofer (LF) drivers.