Wisdom S10, Руководство пользователя

Страница: 8 / 15

8
Up/Down-Firing Setup
(Continued)
4. Use a metric #5 Hex key/Allen wrench to install the four x 60mm screws
and the metal spacers (included in the accessories) to mount the feet to the
surface that will now become the bottom of the subwoofer. The screw
should be inserted through the rubber foot and then through the metal
spacer with the gasket facing the subwoofer as to not scratch the high gloss
finish of the subwoofer (see photo below).
5. Use a metric #5 Hex key/Allen Wrench to re-install the 4 x 20mm screws
into the holes where the rubber feet were factory installed.
Your S10 subwoofer is now ready for connection.