Wisdom S10, Руководство пользователя

Страница: 7 / 15

7
Setting Up your S10
The small footprint of the S10 allows it to be used effectively in many situations
where a more conventional “bass cube” would be either cumbersome or
impossible. Examples include locating it behind a couch, in the small space
between the couch and the wall, lying flat under a set of risers, under a
couch/table, or in a media/family room.
RECOMMENDATION: We recommend using our SW-1 Subwoofer Amplifier with
DSP for the best performance. One SW-1 can power up to two S10 Subwoofers.
Up/Down-Firing Setup
Your new S10 subwoofer has the ability to be used in a down-firing or up-firing
configuration, allowing it to be installed in more locations. This is done in five
simple steps.
1. Lay the subwoofer on a soft surface (carpet or similar) making sure you have
access to the feet and the front or rear (whichever surface the feet will be
mounted to for up- or down-firing), the foam from the packaging can be
used to prevent the speaker from being scratched.
2. Use a metric #5 Hex key/Allen wrench to remove the four x 20mm screws
from the surface where the feet will be mounted. This will become the new
bottom of the subwoofer.
3. Use a metric #5 Hex key/Allen wrench to remove the four x 30mm screws
that mount the rubber feet to the bottom of the subwoofer.